12核32g
storage conf:
########## basics ##########
# Whether to run as a daemon process
--daemonize=true
# The file to host the process id
--pid_file=pids/nebula-storaged-listener.pid
# Whether to use the configuration obtained from the configuration file
--local_config=true
########## logging ##########
# The directory to host logging files
--log_dir=logs
# Log level, 0, 1, 2, 3 for INFO, WARNING, ERROR, FATAL respectively
--minloglevel=1
# Verbose log level, 1, 2, 3, 4, the higher of the level, the more verbose of the logging
--v=4
# Maximum seconds to buffer the log messages
--logbufsecs=0
# Whether to redirect stdout and stderr to separate output files
--redirect_stdout=true
# Destination filename of stdout and stderr, which will also reside in log_dir.
--stdout_log_file=storaged-listener-stdout.log
--stderr_log_file=storaged-listener-stderr.log
# Copy log messages at or above this level to stderr in addition to logfiles. The numbers of severity levels INFO, WARNING, ERROR, and FATAL are 0, 1, 2, and 3, respectively.
--stderrthreshold=3
# Wether logging files' name contain timestamp.
--timestamp_in_logfile_name=true
########## networking ##########
# Comma separated Meta server addresses
--meta_server_addrs=metad:9559
# Local IP used to identify the nebula-storaged process.
# Change it to an address other than loopback if the service is distributed or
# will be accessed remotely.
--local_ip=storaged
# Storage daemon listening port
--port=9779
# HTTP service ip
--ws_ip=storaged
# HTTP service port
--ws_http_port=19779
# heartbeat with meta service
--heartbeat_interval_secs=10
######### Raft #########
# Raft election timeout
--raft_heartbeat_interval_secs=30
# RPC timeout for raft client (ms)
--raft_rpc_timeout_ms=500
## recycle Raft WAL
--wal_ttl=14400
########## Disk ##########
# Root data path. split by comma. e.g. --data_path=/disk1/path1/,/disk2/path2/
# One path per Rocksdb instance.
--data_path=/data/storage
# Minimum reserved bytes of each data path
--minimum_reserved_bytes=268435456
# The default reserved bytes for one batch operation
--rocksdb_batch_size=16384
# The default block cache size used in BlockBasedTable. (MB)
# recommend: 1/3 of all memory
--rocksdb_block_cache=10360
# Disable page cache to better control memory used by rocksdb.
# Caution: Make sure to allocate enough block cache if disabling page cache!
--disable_page_cache=false
# Compression algorithm, options: no,snappy,lz4,lz4hc,zlib,bzip2,zstd
# For the sake of binary compatibility, the default value is snappy.
# Recommend to use:
# * lz4 to gain more CPU performance, with the same compression ratio with snappy
# * zstd to occupy less disk space
# * lz4hc for the read-heavy write-light scenario
--rocksdb_compression=lz4
# Set different compressions for different levels
# For example, if --rocksdb_compression is snappy,
# "no:no:lz4:lz4::zstd" is identical to "no:no:lz4:lz4:snappy:zstd:snappy"
# In order to disable compression for level 0/1, set it to "no:no"
--rocksdb_compression_per_level=
--rocksdb_filtering_prefix_length=12
############## rocksdb Options ##############
# rocksdb DBOptions in json, each name and value of option is a string, given as "option_name":"option_value" separated by comma
--rocksdb_db_options={"max_subcompactions":"4","max_background_jobs":"4","skip_checking_sst_file_sizes_on_db_open":"true"}
# rocksdb ColumnFamilyOptions in json, each name and value of option is string, given as "option_name":"option_value" separated by comma
--rocksdb_column_family_options={"disable_auto_compactions":"true","write_buffer_size":"67108864","max_write_buffer_number":"4","max_bytes_for_level_base":"268435456"}
# rocksdb BlockBasedTableOptions in json, each name and value of option is string, given as "option_name":"option_value" separated by comma
--rocksdb_block_based_table_options={"block_size":"8192"}
# Whether or not to enable rocksdb's statistics, disabled by default
--enable_rocksdb_statistics=false
# Statslevel used by rocksdb to collection statistics, optional values are
# * kExceptHistogramOrTimers, disable timer stats, and skip histogram stats
# * kExceptTimers, Skip timer stats
# * kExceptDetailedTimers, Collect all stats except time inside mutex lock AND time spent on compression.
# * kExceptTimeForMutex, Collect all stats except the counters requiring to get time inside the mutex lock.
# * kAll, Collect all stats
--rocksdb_stats_level=kExceptHistogramOrTimers
# Whether or not to enable rocksdb's prefix bloom filter, enabled by default.
--enable_rocksdb_prefix_filtering=true
# Whether or not to enable rocksdb's whole key bloom filter, disabled by default.
--enable_rocksdb_whole_key_filtering=false
############### misc ####################
# Whether turn on query in multiple thread
--query_concurrently=true
# Whether remove outdated space data
--auto_remove_invalid_space=true
# Network IO threads number
--num_io_threads=16
# Max active connections for all networking threads. 0 means no limit.
# Max connections for each networking thread = num_max_connections / num_netio_threads
--num_max_connections=0
# Worker threads number to handle request
--num_worker_threads=32
# Maximum subtasks to run admin jobs concurrently
--max_concurrent_subtasks=10
# The rate limit in bytes when leader synchronizes snapshot data
--snapshot_part_rate_limit=10485760
# The amount of data sent in each batch when leader synchronizes snapshot data
--snapshot_batch_size=1048576
# The rate limit in bytes when leader synchronizes rebuilding index
--rebuild_index_part_rate_limit=4194304
# The amount of data sent in each batch when leader synchronizes rebuilding index
--rebuild_index_batch_size=1048576
########## memory tracker ##########
# trackable memory ratio (trackable_memory / (total_memory - untracked_reserved_memory) )
--memory_tracker_limit_ratio=0.8
# untracked reserved memory in Mib
--memory_tracker_untracked_reserved_memory_mb=4000
# enable log memory tracker stats periodically
--memory_tracker_detail_log=false
# log memory tacker stats interval in milliseconds
--memory_tracker_detail_log_interval_ms=60000
# enable memory background purge (if jemalloc is used)
--memory_purge_enabled=true
# memory background purge interval in seconds
--memory_purge_interval_seconds=10
listener配置:
########## nebula-storaged-listener ###########
########## basics ##########
# Whether to run as a daemon process
--daemonize=false
# The file to host the process id
--pid_file=pids_listener/nebula-storaged-listener.pid
########## logging ##########
# The directory to host logging files
--log_dir=/logs_listener
# Log level, 0, 1, 2, 3 for INFO, WARNING, ERROR, FATAL respectively
--minloglevel=0
# Verbose log level, 1, 2, 3, 4, the higher of the level, the more verbose of the logging
--v=4
# Maximum seconds to buffer the log messages
--logbufsecs=0
# Whether to redirect stdout and stderr to separate output files
--redirect_stdout=true
# Destination filename of stdout and stderr, which will also reside in log_dir.
--stdout_log_file=storaged-stdout.log
--stderr_log_file=storaged-stderr.log
# Copy log messages at or above this level to stderr in addition to logfiles. The numbers of severity levels INFO, WARNING, ERROR, and FATAL are 0, 1, 2, and 3, respectively.
--stderrthreshold=2
########## networking ##########
# Meta server address
--meta_server_addrs=metad:9559
# Local ip
--local_ip=listener0
# Storage daemon listening port
--port=9789
# HTTP service ip
--ws_ip=listener0
# HTTP service port
--ws_http_port=19789
# HTTP2 service port
--ws_h2_port=19790
# heartbeat with meta service
--heartbeat_interval_secs=10
########## storage ##########
# Listener wal directory. only one path is allowed.
--listener_path=data/listener
# This parameter can be ignored for compatibility. let's fill A default value of "data"
--data_path=data/storage
# The type of part manager, [memory | meta]
--part_man_type=memory
# The default reserved bytes for one batch operation
--rocksdb_batch_size=4096
# The default block cache size used in BlockBasedTable.
# The unit is MB.
--rocksdb_block_cache=4
# The type of storage engine, `rocksdb', `memory', etc.
--engine_type=rocksdb
# The type of part, `simple', `consensus'...
--part_type=simple
错误截图：
这个是storage的cpu占用，listener也一样的是IOThread打满了
磁盘没有读写(1MB都没有的速度)
没有错误日志
